SpeedyBee VTX TX800 5.8GHz 48CH 800mW Output Power

SpeedyBee TX800 5.6gr Light Weight VTX make your drone lighter, max 800mW output High - efficiency heatsink

Support IRC Tramp Protocol

TX800 supports the IRC TRAMP protocol and the modification of video transmission parameters through the remote control, Including frequency, working power and so on.

If your flight controller supports Bluetooth or WiFi, You can also modify the video transmission parameters through the SpeedyBee App.

Power Setup (Lock & Unlock)

The factory default setting is in LOCK mode with red LED blinking and only 25mW is availlable. You can switch to UNLOCK mode by long pressing the button for 10 seconds, and the red LED will be constant ON or OFF, but not blinking.

Specifications :

Frequency Channel : 5.8GHz 48CH

Output Power : PIT/25mW/200mW/400mW/800mW

Working Current : 5V@250~750mA

Voltage out : 5V@max 250mA

Voltage in : 3.7-5.5V

Video input impedance : 75 Ohm

Antenna Connector : MMCX

Weight : 5.6g (without antenna)

PCB Size : 28mm*28mm@20*20

Mounting holes : M4 holes on the PCB; M3 holes on the metal heat sink

Key Operation :

Short press the button to switch CH1/2/3/4/5/6/7/8.

Long press the button for 2 seconds to enter the BAND mode; then short press to

switch band1/2/3/4/5/6.

Long press the button for 5 seconds to enter the POWER mode; then short press to

switch to 25/200/400/800mw.

Long press the button for 10 seconds to unlock/lock

Package :

1 x TX800

1 x MMCX Antenna

1 x MMCX to SMA Cable

1 x 1.0mm 4pin Cable