Dji Robotmaster S1 Original - Dji Robo Master S1

Specifiction:

Camera

FOV:120

Max Still Photo Resolution:

Max Video Resolution: FHD: 1080/30fps / HD: 720/30fps

Max Video Bitrate: 16 Mbps

Photo Format: JPEG

Video Format: MP4

Sensor: CMOS 1/4; Effective pixels: 5 MP

Operating Temperature Range: -10 to 40 C (14 to 104 F)

Narrow Infrared Units:

Effective Range [1]: 6 m (in indoor lighting conditions)

Effective Area: Varies from 10to 40

Effective area decreases as distance from the target increases.

Wide Infrared Units:

Effective Range [1]: 3 m (in indoor lighting conditions)

Effective Width: 360 (in indoor lighting conditions)

Hit Detector:

Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter 6mm, launching speed 20m/s, and the angle between the hit direction and hit detector plane is no less than 45.

Maximum Detection Frequency: 15 Hz

DJI Robomaster S1:

Weight: Approx. 3.3 kg

Dimensions: 320240270 mm (length width height)

Chassis Speed Range:

0-3.5 m/s (forward)

0-2.5 m/s (backward)

0-2.8 m/s (sideways)

Max Chassis Rotational Speed: 600/s

M3508I Brushless Motor:

Max Rotational Speed: 1000 rpm

Max Torque: 0.25N*m

Max Output Power: 19 W

Operating Temperature Range: -10 to 40 C (14 to 104 F)

Driver: FOC

Control Method: Closed-loop speed control

Protection: Overvoltage/Overtemperature/Soft-start/Short-circuit/Chip and sensor anomaly detection

Control:

Controllable Launching Frequency: 1-8/s

Max Launching Frequency: 10/s

Initial Launching Speed: Approx. 26 m/s

Average Load: Approx. 430

Gimbal:

Controllable Range: Pitch: -20 to +35/ Yaw: 250

Mechanical Range: Pitch: -24 to +41 / Yaw: 270

Max Rotational Speed: 540/s

Vibration Control (on the flat surface): 0.02