2x50w + 100w Bluetooth 5.0 Tpa3116D2 Power Subwoofer Amplifier 2.1 Channel Digital Audio Stereo

#2*50W+100W #Bluetooth-compatible #5.0 #TPA3116D2 #Power #Subwoofer #Amplifier #Board #2.1 #Channel #Digital #Audio #Stereo #Equalizer #AUX

2*50W+100W Bluetooth-compatible 5.0 TPA3116D2 Power Subwoofer Amplifier Board 2.1 Channel Digital Audio Stereo Equalizer AUX Amp DIY

100% brand new and high quality.

Features:

This is a support Bluetooth-compatible 5.0 audio receiver Updated, with a pre-amplifier, Bass crossover Processing.

With bass, left and right channel volume adjustment, treble adjustment, the total volume potentiometer control 2.1 amplifier board.

Use DC power supply: 12-24V Power Supply, Maximum support 50W (left channel) +50 W (right channel) +100 W (bass channel) three-channel output.

Use high-performance digital amplifier chip as the core, a parallel bridge subwoofer output, do a left and right channel output.

Wide operating voltage, power-saving design, efficiency up to 90%. You can use good performance switching power supply, laptop switching power supply, you can also use the charging bottle, or car power supply and so on.

Function switch Instructions for use:

1. Plug in the power on default Bluetooth-compatible mode

2. When Bluetooth-compatible Disconnected, Single Press switch can Change to audio Input Mode.

3. Bluetooth-compatible play status, short press the switch to pause / play.

Specifications:

Voltage Range: DC 11-25V

Subwoofer frequency range: 20Hz~200Hz

Bluetooth-compatible receiving distance: > 8 m

Audio input sensitivity: 600-800mV

Frequency response range: 20Hz-20KHz

Speaker impedance: left and right channel speakers: 4-8 ohm

Bass speaker impedance: 2-8 OHM

Material: Metal and Plastic

Size: approx.101x120mm/3.98x4.72in

Color: As pictures shown

Optional Styles: with Bluetooth-compatible / without Bluetooth-compatible / Shell

Quantity: 1 Set

Note:

No retail package.

Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Includes:

Type A: 1 x Bluetooth-compatible Subwoofer Amplifier Board

or

Type B: 1 x Subwoofer Amplifier Board

or

Type C: 1 x Shell

(other accessories demo in the picture is not included.)